HANK Electronics Ltd.
Main products:hdmi cable,hdmi splitter,hdmi switch,hdmi matrix,HDBase-T matrix
Products
Contact Us
  • Contact Person : Ms. Chen Kelly
  • Company Name : HANK Electronics Ltd.
  • Tel : 0086-755-82537027
  • Fax : 0086-755-82025852
  • Address : Guangdong,Shenzhen,Block B9,Hengfeng Industrial City,Hezhou, Xixiang Town,Baoan district,Shenzhen
  • Country/Region : China
  • Zip : 518101

Wireless HDMI Transmitter and Receiver

Wireless HDMI Transmitter and Receiver
Product Detailed
wireless HDMI Extender 1x1 1.Full HD1080P over 30m wireless transport 2.5G frequence,adopt MIMO&OFDM technology

     1. Install the transmitter on a base and then place the transmitter in a suitable position beside an HD video source.               

                                                 

        

       2. The wireless network status indicator is ON after the transmitter power              supply  is connected and wireless network connection is made successfully. 

                              

        3. The video status indicator is ON after the transmitter is connected to the             video output socket of the HD source with an HD AV cable. 

                       

           * Any video source with the HDMI video output interface can be connected.          4. Connect the IR remote extension connector to the IR remote signal output hole of the transmitter. 

                          

  Installation and Use for Receiver

          1. Install the receiver on another base and place the receiver beside an HD display device in another room.

                                                                       

                               2. The wireless network status indicator is ON after the receiver power supply is                    connected and wireless network connection is made successfully.

                              

             3. Connect the receiver to the HD display device with a standard HD AV cable.              The video status indicator on the receiver is ON after video connection is made             successfully. Images appear on the display device. 

              

             * Any display device with the HDMI video input Interface can be connected.

            4. The video source can be controlled remotely by pointing the remote control at              the  IR receiving window on the receiver.

                                     

                Note: This product matches only with an IR remote control in the 38 KHz  carrier modulation mode.

       

 

 

Wireless HDMI Transmitter and Receiver



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.